Services

Houses here deal with constant damp, overhanging fir, and wind off the water. We handle composition, metal, and low-slope residential systems, matching the material to your pitch, your tree cover, and your budget.

A failing flat roof closes businesses. We install and repair TPO, PVC, and modified bitumen systems on offices, retail buildings, and multifamily properties, scheduling work around your hours so the doors stay open.

Bad siding hides rot until the sheathing is soft. We strip the old cladding, inspect what is underneath, correct the moisture problem, then install fiber cement, engineered wood, or vinyl with proper flashing.

Every gallon that hits your roof has to go somewhere. Seamless aluminum gutters, correctly pitched downspouts, and guards sized for fir needles keep that water off your siding and away from your foundation.

Fogged glass and cold drafts mean the seals are gone. Replacement units with insulated double glazing quiet the street, cut winter heat loss, and stop the condensation that feeds mold on your sills.

Layout matters more than finishes. We rework cabinets, counters, lighting, and plumbing runs around how you actually cook, then handle the permits, the trades, and the schedule so the room comes back together.

Small rooms punish sloppy waterproofing. Our bathroom builds start with the substrate and the vent fan, then move to tile, glass, fixtures, and storage that survive a decade of daily steam.

Sometimes the fix is structural, not cosmetic. Whole-house projects let us open walls, add square footage, correct old framing, and update systems in one coordinated run instead of five disconnected trips.

Wet winters end cheap decks early. We build on properly flashed ledgers and treated framing, then surface in cedar or composite so your outdoor room lasts well past the next few summers.

This city is built on slopes. Engineered block, concrete, and timber walls hold your grade in place, create usable yard, and handle drainage so hydrostatic pressure never gets a chance to build.

Coating fails from the substrate outward, not from the color fading. We wash, scrape, caulk, and prime before any finish coat, then phase exterior and interior repainting around your operating hours so tenants, staff, and customers keep moving through the building normally.

Raking light down a corridor exposes every joint somebody hurried. We set metal stud framing true, hang board to the rated assembly your drawings call for, and finish to an agreed level so nobody debates expectations after the painter arrives on site.